Adjustment method of vibratory polishing machine

Vibratory polishing machine workpiece processing, the first is to put the workpiece into the container barrel, the container is vibrated up and down and left and right through special devices, so that the parts and the grinding medium friction with each other. The quality of the finishing process often depends on the vibration frequency and amplitude. The processing can be adjusted by the following methods:

The vibration source is generated by a vibration motor. Two ends of the vibration motor main shaft are equipped with two eccentric blocks. By adjusting the relative position and weight of the eccentric block, the turning speed and vibration force can be adjusted. If the turning speed of the vibrator is slow, you can adjust the upper eccentric block to the 12 o'clock position of the clock and attach an iron plate to the upper eccentric block to increase the weight of the upper eccentric block; if the vibration force is weak, you can set the upper eccentric block Adjust the eccentric block to the 12 o'clock position and the lower eccentric block to the 7-9 o'clock position. It should be noted that if it is necessary to frequently adjust the turning speed of the vibration grinder, it is more convenient and accurate to connect an external frequency converter. After the adjustment is completed, the machine gate must be closed in time to avoid danger.