What are the benefits of CNC Machining Prototype Service?

1. CNC Machining Prototype Service multi-axis control and multi-axis linkage: the commonly used machining center is three-axis linkage, generally can increase the swing angle and increase the rotary coordinates, thus forming four-axis linkage, five-axis linkage, seven-axis linkage, and even More axis-linked machining centers.

2. Parallel machine tools: The functions of common machining centers are generally fixed. Combining vertical machining centers, horizontal machining centers, machining centers, turning centers, etc., can form a machining system and increase the processing range and processing capacity of the machine tool. .

3, tool damage alarm: using infrared, acoustic emission and laser detection means, the tool can be tested. If the tool is found to be worn and damaged, the alarm, automatic compensation or replacement of the spare tool can be performed in time to ensure product quality.

4, tool life management: a number of blades on a tool, a number of tools working at the same time, unified management, can improve processing efficiency.

5. Machine tool overload automatic protection: The machine tool can automatically protect the machine tool according to the load size during the machining process. When the load exceeds the maximum load set by the machine tool, the machine tool will automatically shut down, and the load size can be set and changed by itself.

6. Machining dynamic solid simulation: During the machining process, the machining state of some parts in the machine tool is not easy to observe. If the simulation function of the dynamic entity is added, the machining state of the workpiece can be observed at any time, thereby preventing the processing. Bad phenomena, such as cutting, overcutting, not only, unreasonable steps, etc.

7, on-line inspection of workpieces: also known as real-time detection, in the process of processing in the real-time detection of the workpiece, can be found and modified errors. This function can effectively avoid the re-clamping positioning problem caused by the unqualified after the normal processing, shorten the production time and improve the production efficiency.