vibratory polishing machine Reason for yellow foam during operation

  When the product is polished, the reason why the polishing agent will appear yellow is summarized as follows:

1. First of all, it is generally necessary to check whether the abrasive surface finish used in your vibratory polishing machine is OK. If the abrasive material is made of steel, you need to check if there is any indication of perforation. If this phenomenon is already present, use alkaline. The brightener should be self-grinding for about 1 hour, and the surface of the vibrating mill should be thoroughly cleaned until it is clean and free of debris, and be careful not to wash it with hard water for too long, otherwise it can only be counterproductive.

2. The time for vibrating and polishing work is not up to standard or the inside of the machine surface is not clean.

3. Check whether there is any quality problem with the polishing liquid, brightener or brightener used. Generally, if the product can use neutral or alkaline polishing agent, try to use such medicinal water. The benefit of this polishing agent is not to hurt. Hand and save on abrasives, because the loss is at least about 30% less than the acidic potion. But the stability of the potion is better than the acidity.

4. If the product is manually polished at the beginning, please confirm whether the surface oxide of the product has been polished before polishing the machine to avoid the abnormality of the gloss or the lack of gloss after the surface of the product is vibrated and polished.