How to properly clean the infrared thermal imager camera

    Some of the electronic products we use every day, such as computers and mobile phones, are dirty and wiped off with a soft cloth or toilet paper. However, for a sophisticated infrared thermal imager camera, it may not be so easy to clean.

   1. Preparation of tools for cleaning infrared thermal imager camera
   Before cleaning the infrared thermal imager camera, we must first select the auxiliary tools for cleaning, such as warm water, neutral detergent, soft cloth, medical cotton, alcohol, special lens cleaning fluid, acetone and so on.

   2. Clean the casing of the infrared thermal imager camera
   For the cleaning of the infrared thermal imager camera body shell, we can wipe it with a soft cloth dipped in water. If it is difficult to wipe off the contaminants, you can take a proper amount of cleaning solution for cleaning, then wring out the soft cloth and wipe the thermal imager multiple times. For the case, just try cleaning fluid. This method is also suitable for cleaning some accessories of infrared thermal imager camera. But please be careful not to let the cleaning liquid stay on the charging cable or other key parts of the infrared thermal imager camera, so as not to damage the thermal imager.

    3. Clean the infrared lens of infrared thermal imager camera
   Because the infrared lens surface of the infrared thermal imager camera has a layer of precision coating, everyone should be very careful when cleaning the infrared lens, and the movement should be gentle, and never use too much force to avoid scratching the lens. In actual operation, a small amount of lens cleaning solution can be gently wiped with medical cotton. After removing contaminants, use a soft cloth to remove the cleaning solution on the lens. Note that the wiped medical cotton cannot be reused. This will cause secondary pollution.