How to clean car HONDA GCV160 carburetor

           First, you need to remove the air filter, then start the engine to allow the engine to reach the maximum speed, and then quickly press the carburetor air inlet with the palm of your hand.

         At this time, strong suction power can be felt at the palm of the hand, and the engine speed also gradually decreases. When the engine speed is low, quickly remove the palm to restore the engine to its normal state.

         Repeat the above two parts several times until the engine is working properly. If the carburettor cleaning agent is available on the car, it can be used together with a better effect, so the number of times can also be reduced.

          Using this method, there is no need to worry about damaging the HONDA GCV160 carburetor. From the practical effect, after the above cleaning, failures such as weak driving and acceleration lag caused by the carburetor's poor fuel supply can be eliminated. The principle is to suddenly block the air inlet when the engine is running at high speed, and use the working inertia of the engine to generate a greater vacuum in the carburetor, thereby increasing suction to clear the oil passage and the air inlet.